Furuno PUMPLA17-12 12v Type 2 Linear Drive Unit

The Accusteer PUMPLA17-12 Linear Actuator is designed to interface an autopilot system with mechanical steering systems such as wire, cable or chain drives. This linear actuator consists of a hydraulic drive unit, steering cylinder, and interconnecting hoses.This unit is also available as the PUMPLA11-12 using a 1.5" x 9" RAM.

PUMPLA17 Specifications:

• 1.75" x 9" RAM
• Stainless steel braid covered hoses
• Compact and rugged drive unit
• Average Motor Current: 4-8 Amps ? PUMPLA17-12 (12VDC Motor), 3-5 Amps ? PUMPLA17-24 (24VDC Motor)
• Cylinder Design: Balanced
• Max Cylinder Stroke and Swept Volume: 12 in. (30.5 cm) and 23.5 cubic in. (215 cc)
• Solenoid/Clutch Current Draw: 1.5 Amps (12V)/0.75 Amps (24V)
• Max Cylinder Thrust @ 500 psi: 1045 lbs (474 kg)
• Hard Over Time (HOH): About 14.7 Seconds
• Maximum Rudder Torque (+/-35 deg. @ 10.5 in. Rudder Shaft to Tiller Bolt Distance): 10450 in. lbs. (1181 Nm)
• Raymarine Equivalent Linear Drive: TYPE 2 (Recommended Maximum Boat Displacement = 48,500lbs (22,000kg))
• Simrad Equivalent Linear Drive: HLD2000L